Mitsubishi 2070sb User Manual

3

To attach the Diamond Pro monitor to your system, follow these
instructions:

1. Turn off the power to your computer.
2. If necessary, install the graphics card into your system. For more information,

refer to the graphics card installation manual.

3. For the PC: Connect the 15-pin mini D-SUB connector of the signal cable to the

connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the Diamond Pro Macintosh cable adapter (not in-

cluded) to the monitor connector on the Macintosh (Figure B.1). Attach the
15-pin mini D-SUB end of the signal cable to the Diamond Pro Macintosh
cable adapter on the computer (Figure B.1). Tighten all screws.

4. Connect the other end of the signal cable to the connector on the back of the

Diamond Pro monitor.

5. Connect one end of the power cord to the Diamond Pro monitor and the other

end to the power outlet (Figure C.1).

6. Turn on the monitor (Figure D.1) and the computer.

For download information on the Windows

®

 98/2000/Me/XP INF file for your

Diamond Pro monitor, refer to the References section of this User’s Manual.

If you have any problems, please refer to the Troubleshooting section of
this User’s Manual.

Figure A.1

15-pin

mini

D-SUB

Capative Signal Cable

Mac Adapter

(Not Included)

Capative Signal Cable

Figure B.1