Brodit Holder with Pass-Through Connector 277028 Leaflet
Product codes
277028
Pass-Through
Connector Holder
Holders with extra features
Holder with pass-through connector. All cables
that can be used with the GPS device can also
be used with the holder, for example a TMC
cable. This means that you can have both
charging and TMC connected to the GPS in
the same time!
that can be used with the GPS device can also
be used with the holder, for example a TMC
cable. This means that you can have both
charging and TMC connected to the GPS in
the same time!
When you have attached the cable to the
holder it is firmly in place and you do not have
connect it manually to the device each time
you put the GPS in the holder.
holder it is firmly in place and you do not have
connect it manually to the device each time
you put the GPS in the holder.
You can choose between a passive holder with
tilt swivel, an active holder with cigarette lighter
plug or an active holder for fixed installation.
Active holders with charging cable connect to
the vehicle’s cigarette lighter socket.
tilt swivel, an active holder with cigarette lighter
plug or an active holder for fixed installation.
Active holders with charging cable connect to
the vehicle’s cigarette lighter socket.
The active holders for fixed installation are
connected behind the dashboard, this gives a
neat installation without cables hanging over
the interior. 12/24 Volt
connected behind the dashboard, this gives a
neat installation without cables hanging over
the interior. 12/24 Volt
You can easily take the device with you when
leaving the vehicle. The holdera are equipped
with a tilt swivel so they can be adjusted in
order to avoid light reflection on the screen.
Attach onto ProClip Mounting Platform.
leaving the vehicle. The holdera are equipped
with a tilt swivel so they can be adjusted in
order to avoid light reflection on the screen.
Attach onto ProClip Mounting Platform.