LaCie 301087u User Manual

User Manual

page 1

Click on an unselected finger to begin register-

ing a fingerprint. Click Next to continue. The 

swipe dialogue appears.

This dialogue will request that you swipe the 

selected finger over the fingerprint sensor. If 

the swipe is successful, the dialog prompts you 

to swipe the same finger a second and third 

time for confirmation. 

 

Your finger should lie flat in the recess. Make 

sure the top of your finger touches the top of 

the recess and slide it down slowly. For more 

on how to use the fingerprint sensor see section 

3.1. 

How to Use the Fingerprint Sensor

.

When  you  have  successfully  swiped  your  fin-

ger three times, the swipe dialog displays three 

check marks and then closes. 

Once your fingerprint is successfully registered, 

the  dialogue  closes  and  you’ll  be  returned  to 

the main Fingerprints registration screen. Now 

you’ll need to register a second fingerprint.

1.

2.

3.

4.

Swipe dialogue

  If the swipe is not 

successful, you’ll get an error dialog stating 

that  the  swipe  registration  failed.  Consult 

section 10. 

Troubleshooting the Fingerprint 

Sensor

 if you cannot get a successful swipe 

after several attempts.

  Each user must reg-

ister at least two fingerprints in order to use 

the  drive. That  way,  if  one  finger  is  injured 

and must be bandaged, the user will still be 

able to access the drive.

  Screenshots may be   

differ slightly on your computer.

Begin fingerprint registration