Cradlepoint Technology mbr1200 User Guide

CRADLEPOINT

MBR1200 | USER MANUAL Firmware ver. 1.6.12

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 99

7.8 SNMP

Use  the  Simple  Network  Management  Protocol  (SNMP)  Settings  sub-
menu to enable or disable the SNMP protocol over either the LAN, WAN,
or both interfaces. For security, you can also set the community names for
both  Get  and  Set  SNMP  requests.  SNMP  version  1  is  currently
implemented.  The  supported  MIB  is  the  standard  RFC  1213  MIB  as
maintained  by  the  IETF.  Additional  Cellular-router  MIB  elements  are
available through CradlePoint's WIPIPE-MIB.

Enable on LAN. Enable SNMP on the local LAN ports so that a local
device can manage the router.

Enable on WAN. Enable SNMP on the external WAN port so that an
external device can manage the router.

Get Community Name. Variable length string which allows access to
read-only data within this community group. The community names should
never be "public" or "private". Community names are a maximum of 15 characters long. Names should contain at least one number and one
capital letter. Access to the community name should be limited to the Administrator of realms.

Set Community Name. Variable length string which allows access to read and write data within this community group. The community names
should never be "public" or "private". Community names are a maximum of 15 characters long. Names should contain at least one number and
one capital letter. Access to the community name should be limited to the Administrator of realms.

SNMP WAN Inbound Filter. If SNMP is enabled on the WAN port you can create a filter that allows or denies specific IP ranges to connect to the
SNMP server.

Details. This shows the details of the selected Inbound Filter rule.

When you are done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and
permanent.