Armitron 20 User Manual

Page of 1
 FEATURES
• Conventional Analog Display with Sweep Second Hand
• Time Telling Mode (Hours, Minutes, and Seconds)
• Calendar Mode (Month, Date, and Day)
• 12/24 Hour (Military Time)
• 24 Hour Alarm
• Chronograph Mode with Lap Time to 1/100th of a   
 Second
• Hourly Chime: One ‘Beep’ sound every full Hour
• Water Resistant as indicated on the watch 
 SETTING ANALOG TIME
1. Carefully pull Crown out all the way and turn in either
direction until desired time is diplayed.
2. Carefully push Crown back in all the way to resume
time keeping.
 SELECTING DIGITAL FEATURES
1. Time Telling Mode displays Hours,
Minutes, and Seconds.
2. From Time Telling Mode, press ‘C
once. 24 Hour Alarm Mode appears.
3. Press ‘C’ again. Chronograph Mode
appears. 
4. Press ‘C’ again. Calendar Mode
appears. 
5. Press ‘C’ again to return to Time
Telling Mode.
 SETTING THE TIME
1. From Time Telling Mode, press and
hold ‘B’ for 2-3 seconds. Seconds 
flash. Press ‘A’ to zero out Seconds.
NOTE: Zeroing out 30 or more Seconds will automatically 
add one minute to digital Time Telling.
2. Press ‘B’, Minutes flash. Press ‘A
to advance the Minutes.
3. Press ‘B’, Hours flash. Press ‘A
to advance the Hour.
 12/24 HOUR (MILITARY) TIME
4. Press ‘B’, ‘12’ flashes to indicate
12/24 Hour Format Setting. Press ‘A’ 
once. ‘24’ flashes to indicate 24 Hour
Time Format. Press ‘A’ again to return
to normal 12 Hour Format.
5. Press ‘B’ to end setting sequence and
to return to Time Telling Mode.
 SETTING THE CALENDAR
1. From Calendar Mode, press and hold
B’ for 2-3 seconds. Date flashes. 
Press ‘A’ to advance the Date.
2. Press ‘B’, Months flash. Press ‘A
to advance the Month.
3. Press ‘B’, Day flashes. Press ‘A
to advance the Day.
4. Press ‘B’ to end setting sequence.
5. Press ‘C’ once to return to Time Telling Mode.
 SETTING THE ALARM
1. From Time Telling Mode, press ‘C
once to obtain Alarm Mode.
2.  Press and hold ‘B’ for 2-3 seconds.
Alarm Hours flash. Press ‘A’ to
advance the Hour.
3. Press ‘B’, Alarm Minutes flash. 
Press ‘A’ to advance the Minutes.
4. Press ‘B’ to end setting sequence.
5. Press ‘C’ three times to return to Time Telling Mode.
 ACTIVATING/DEACTIVATING 24 HOUR ALARM
  
1. From Time Telling Mode, press ‘C
once to obtain Alarm Mode.
  
2.  Press ‘A’ once. Alarm Symbol appears
on the left side of the display to
indicate the Alarm is activated and will
sound at the preset Alarm Time for 
20 seconds or until any button is
pressed.
3. Press ‘A’ to deactivate the Alarm.
4. Press ‘C’ three times to return to Time Telling Mode.
 ACTIVATING THE ALARM AND HOURLY CHIME
1. From Time Telling Mode, press and
hold ‘A’. At the same time, press ‘B’.
Hourly Chime symbol appears on the
left side of the display to indicate the
Hourly Chime is activated and will now
sound a beep every hour on the hour.
2. Repeat above procedure to deactivate Hourly Chime.
 CHRONOGRAPH
1. From Time Telling Mode, press ‘C’ twice to obtain the 
Chronograph Mode.
2. Press ‘A’ to start timing.
3. Press ‘A’ again to stop timing.
4. Press ‘B’ to reset to zero.
LAP TIME
5
. To calculate a competitor’s lap time, press ‘A’ to begin 
timing.
6. Press ‘B’ to freeze competitor’s lap time. Internal 
stopwatch is still counting.
7. Press ‘A’ to freeze competitor’s final time.
8. Press ‘B’. Competitor’s elapsed time will be revealed.
9. Press ‘B’ again to reset to zero.
10. Press ‘C’ twice to return to Time Telling Mode.
 
 WATER RESISTANCE
This  is  a  WATER  RESISTANT  watch.  Do  not  operate  the 
push buttons below the surface of the water. Should water 
or  condensation  appear  in  the  watch,  immediately  have 
the  watch  checked.  Water  can  corrode  electronic  parts 
inside the case.
 CHANGING THE BATTERY
 
Change  the  battery  when  the  watch  becomes  slow,  the 
readout  darkens  or  does  not  appear,  or  the  backlight
fails.  Before  removing  the  old  battery,  be  sure  to  denote 
its  polarity  so  that  the  new  battery  is  installed  in  exactly 
the same way. Replace with same or equivalent only. This 
watch  contains  precise  electronic  components  and   
should  only  be  opened  by  a  qualified  watch  technician. 
However,  it  is  not  necessary  to  return  your  watch  to  the 
manufacturer for battery replacement. It is recommended 
that you bring your timepiece to a local jeweler.
Dear Customer:
Help your watch/jewelry retailer protect our environment 
by properly recycling the button cell battery in your watch. 
Professional  jewelers  and  watch  retailers  are  best 
equipped  to  replace  the  battery  in  your  watch  without 
damage  to  the  watch  case  and  movement  inside.  They 
have  the  specialized  tools  and  experience  to  do  the  job 
right. Inexperienced people can scar the case and damage 
the water resistant seal – voiding your warranty.
It  is  important  to  recycle  your  watch  battery  in  an 
environmentally  safe  way.  Watch  batteries  contain  very 
small  amounts  of  mercury,  which  is  required  to  prevent 
corrosion of the battery and damage to your watch. There 
is  no  danger  to  you  or  your  watch  from  the  mercury 
because it is in the sealed battery. But you need to recycle 
your  watch  battery  properly.  Your  professional  watch/ 
jewelry retailer is the best person to do this for you. These 
professionals  collect  used  batteries  and  recycle  them 
through licensed waste management companies.
Do  our  environment  and  your  watch  a  favor.  Ask  your 
watch/jewelry professional to replace your battery when it 
expires.
A
B
 
CROWN
C
9:00
0 0
P
1:00
A L
A
9:00
0 0
P
5 3
T U
5
3
T U
5 3
T U
12
H
2 4
H
1:00
A L
A
1:00
A L
A
1:00
A L
A
WATCH  INSTRUCTIONS
T205 (5ATM)
20/1299, 20/1301BLU, 20/1387BLU, 20/1427BLU, 20/1441BLU, 20/1443BLU, 20/1451GMG, 20/1513BLU 
9:00
0 0
P
1:00
A L
A
00'00''
0 0
5 3
T U
9:00
0 0
P
9:00
0 0
P
9:00
0 0
P
9:00
0 0
P
9:00
0 0
P