Jitterbug one touch User Guide

9

1. Open the phone. 

2. Press the      button in the upper right

corner until the screen lights up.

The "Jitterbug" logo will appear on

your screen before your phone is

ready to use. If a connection isn’t

possible, you'll see "No Service"

on the screen.

3. When you hear a dial tone, your phone

is ready to use. 

If you are not able to place a call,

go to another phone and call us at

1-800-733-6632 so we can help you.

1. Open the phone.

2. Press and hold the      button until the

Jitterbug tune plays. Your power is off. 

8

1. Slide the rounded end of

the battery into the back of

your phone, lining up the

gold contacts on the battery

with the gold contacts inside

the phone.

2. Press the top end of the

battery down until it snaps

into place. 

1. If the phone is on, turn it off by opening

the phone and holding down the      button

for two seconds until the Jitterbug tune

plays.

2. Slide the battery release

latch (1) on the back of the

phone toward the top end of

the phone and hold.

3. Lift the battery (2) up and away from

the phone, top end first, or simply turn

your phone over. The battery will drop out.

NOTE

ALERT

Back Side

Back Side

GH68-085806_Touch_1005_Qx6.qxp  10/12/06  4:58 PM  Page 11