Enterasys mrx Installation Instruction
INTRODUCTION
Page 1-1
CHAPTER 1
INTRODUCTION
Welcome to the Cabletron Systems MRX/MRX-2 and MRXI/MRXI-2
10BASE-T HUB Installation Guide. This manual covers
installation instructions and provides reference information for the
following Cabletron Systems 10BASE-T Hubs:
10BASE-T HUB Installation Guide. This manual covers
installation instructions and provides reference information for the
following Cabletron Systems 10BASE-T Hubs:
•
MRX
-
-
12-10BASE-T (using 50-pin Champ connector)
-
2 Single Port Interface Module (SPIM) slots
-
No Management
•
MRX-2
-
-
12-10BASE-T (using RJ-45 connectors)
-
2 Single Port Interface Module (SPIM) slots
-
No Management
•
MRXI
-
-
12-10BASE-T (using 50-pin Champ connector)
-
2 Single Port Interface Module (SPIM) slots
-
SNMP Compliant Management
•
MRXI-2
-
-
12-10BASE-T (using RJ-45 connectors)
-
2 Single Port Interface Module (SPIM) slots
-
SNMP Compliant Management
NOTE: The term HUB is used throughout this manual when
describing features and functions that are common to all of the devices
listed above. The terms MRX, MRX-2, MRXI and MRXI-2 are only
used when it is necessary to describe features that are unique to a
specific device.
describing features and functions that are common to all of the devices
listed above. The terms MRX, MRX-2, MRXI and MRXI-2 are only
used when it is necessary to describe features that are unique to a
specific device.
All four HUBs can serve as a repeater to allow expansion of existing
802.3 networks using a variety of media. All four HUBs are
10BASE-T and 802.3 compliant.
802.3 networks using a variety of media. All four HUBs are
10BASE-T and 802.3 compliant.