Enterasys mrx User Manual
USING THE DEVICE/PORT INFORMATION SCREEN
Page 4-2
Device Information
Device Name:
- is a name, up to 20 characters in length, that you
can assign and enter to serve as a meaningful identifier for the
HUB.
HUB.
Set Modem Baud Rate:
- allows changing the Console Port baud
rate when using a modem.
Ethernet Address:
- displays the Ethernet address of the HUB in
hex.
Set IP Address:
- displays the TCP/IP address currently assigned
for the HUB. You can set this field according to your network
requirements. Use the arrow keys to highlight the Set IP Address
field and enter the desired IP address as 4 decimal values between
1 and 254 using a period as a separator between values as follows:
requirements. Use the arrow keys to highlight the Set IP Address
field and enter the desired IP address as 4 decimal values between
1 and 254 using a period as a separator between values as follows:
254.254.254.254
Packets:
- displays the combined count of packets received by the
HUB’s 14 Ethernet ports, up to a maximum of 4,294,967,295
packets.
packets.
Receive Collisions:
- indicates the combined count of receive
collisions detected.
Transmit Collisions:
- indicates the combined count of transmit
collisions detected.
Device Ports On:
- shows the number of available HUB ports
currently enabled.
Device Ports Off:
- shows the number of available HUB ports
currently disabled.
Port Information
Packets:
- displays the number of packets received by the
currently selected Ethernet port (Port
n
), up to a maximum of
4,294,967,295 packets.