Toastmaster A710 Specification Guide

Page of 2
Foodservice Equipment
Job ________       Item# ________
1400 Toastmaster Drive, Elgin IL  60120-9272  USA - Tel: 847-741-3300 - Fax: 800-635-4725 - www.toastmastercorp.com
Sandwich and Panini Grills
Models A710, A710S, A710P
Form 407 Rev 0 (02/05)
Application
Toastmaster A710 Series Sandwich
and Panini grills are designed to
uniformly grill both sides of a
sandwich at the same time. To add to
the grills’ versatility, the bottom grill
can be heated alone.
General Information
Light-duty electric grill with
simultaneous top and bottom grilling
eliminates flipping sandwiches.
Overall dimensions are 15-1/2”W x
18-7/8”D x 11-3/4”H. Neoprene feet
are provided.
Models A710 and A710S feature
smooth upper and lower grill
plates.
Model A710P features grooved
upper and lower plates.
Construction
Construction is of formed and welded
sheet steel. Grill plates are of cast
aluminum. An 8 oz. capacity grease
receptacle at the rear is easily
removable for emptying and cleaning.
Model A710 features grill plates with a
natural aluminum finish. Models
A710S and A710P feature grill plates
with a DuPont SilverStone Supra
®
nonstick flouropolymer coating.
Electrical
Total rated input is 1.65 kW (0.65 kW
top element, 1.0 kW bottom element).
Available in 120V, 208V or 240V. All
units are single-phase and are
equipped with a 3’ (914mm) cord and
NEMA plug. Refer to the electrical
specifications table on the reverse
side of this sheet.
Heating
A preformed tubular heating element
is clamped beneath the grill on each
of the top and bottom grill plates.
Controls
Controlled by an adjustable
thermostat with range of 150
o
F to
450
o
F with an “OFF” position. A three
position switch is provided to turn the
unit off, operate the bottom grill only,
or operate both top and bottom grills.
The top grill can be adjusted from
paper-thin to thick sandwich heights
and locked into place to provide
consistent result.
Capacity
Grills up to 4 sandwiches at one time..
Warranty
One year parts-and-labor Toastmaster
On-Site Warranty.
Approximate Weights
31 lbs. (14.1 kg) installed, 39 lbs.
(17.7 kg) shipping.
Ordering Information
A710 - 120V, 1 phase, 50/60Hz
A710 - 208V, 1 phase, 50/60Hz
A710 - 240V, 1 phase, 50/60Hz
A710S - 120V, 1 phase, 50/60Hz
A710S - 208V, 1 phase, 50/60Hz
A710S - 240V, 1 phase, 50/60Hz
A710P - 120V, 1 phase, 50/60Hz
A710P - 208V, 1 phase, 50/60Hz
A710P - 240V, 1 phase, 50/60Hz
Coating
Model A710 features grill plates with a
natural aluminum finish.
Models A710S and A710P feature grill
plates with a DuPont SilverStone
Supra
®
 nonstick fluoropolymer
coating. SilverStone Supra
®
 is the
most durable nonstick system of the
DuPont SilverStone
®
 family of
nonstick coatings. The coating was
designed for small electric appliances
and top-of-range cookware, and
works well for a variety of commercial
food processing applications where
resistance to heat and abrasion are
important. It three-coat application
system complies with FDA regulations
governing direct food contact.
SilverStone Supra® is a registered
trade mark of DuPont. All rights
reserved.
A710
A710S
A710P
S
ANDWICH
 
AND
 P
ANINI
 G
RILLS
 - 
MODELS
 A710, A710S, 
A710P