TP-LINK TL-WR841N User Guide

 

  

28

) 

 

Limited by local law regulations, version for North America does not have region selection option. 

¾

 

This field determines which operating frequency will be used. The default channel 

is set to 6. It is not necessary to change the wireless channel unless you notice interference 

problems with another nearby access point 

¾

 

Select any channel width from the pull-down list

.

 

The default setting is 

automatic, which can adjust the channel width for your clients automatically. 

¾

 

The wireless radio of this Router can be enabled or 

disabled to allow wireless stations access.   

¾

 

When wireless clients survey the local area for wireless networks 

to associate with, they will detect the SSID broadcast by the Router. If you select the Enable 
SSID Broadcast

 checkbox, the Wireless Router will broadcast its name (SSID) on the air.

 

Choose menu “Wireless→Wireless Security”, you can configure the security settings of your 

wireless network. 

There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), 

WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key), 

WPA-PSK (Pre-Shared Key).