Output Solutions c-680 lablejet User Guide
• Tear/Cut after each print job
The printer will stop after each print job and is going to wait till the
printed labels are torn off.
printed labels are torn off.
• Select the time after Tear off
This options defines the time the printer is going to wait before printing
the next label
the next label
Tear/Cut Position Adjustment [5]
In case the tear edges are not centric between the labels you can
adjust the position in both directions (forward/backward).
By clicking the arrow keys the label material will be moved in or out of
the printer in 0.5 mm steps.
adjust the position in both directions (forward/backward).
By clicking the arrow keys the label material will be moved in or out of
the printer in 0.5 mm steps.
Save Settings and Load Profile [6]
This functions allows you to save different print profiles and/or to load
previously saved profiles.
previously saved profiles.
Send Settings to printer [7]
To activate all your settings you have to submit these to the printer.
Printer Control [8]
This button opens the Labelprinter Control Box.
Default Data [9]
Activate this button for the default values!
Note:
After activation/deactivation of any option press “Send Settings to printer”
to submit the settings to the printer!
to submit the settings to the printer!
22