ASKProxima a1100 User Guide
35
•
Be extremely careful when removing the lamp housing. In the unlikely
event that the lamp ruptures, small glass fragments may be generated.
The lamp module is designed to contain most of these fragments, but
use caution when removing it. Before replacing a ruptured lamp, clean
the lamp compartment and dispose of cleaning materials. Wash hands
after lamp replacement.
event that the lamp ruptures, small glass fragments may be generated.
The lamp module is designed to contain most of these fragments, but
use caution when removing it. Before replacing a ruptured lamp, clean
the lamp compartment and dispose of cleaning materials. Wash hands
after lamp replacement.
Hg – Lamp contains mercury. Manage in accordance with local
disposal laws. See www.lamprecycle.org.
disposal laws. See www.lamprecycle.org.
4
Loosen the two captive screws that attach the lamp housing to the pro-
jector. Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
jector. Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5
Install the new lamp housing and tighten the screws.
6
Replace the lamp door by sliding it into place and replacing the screw.
7
Plug in the power cord and press the Power button to turn the projector
back on.
back on.
8
To reset the lamp hour timer, navigate to the Status and Service menu
and select Reset Lamp Hours. See page 32 for details.
and select Reset Lamp Hours. See page 32 for details.
loosen two screws