ASKProxima a4 compact Quick Setup Guide
QUICK SET-UP
The following steps will quickly lead you through set-up and
adjustments for the projector connected to a single computer.
The sequence numbers refer to the drawing of the quick set-
up. Before connecting, please remember to switch off the
computer and disconnect the projector power cord.
adjustments for the projector connected to a single computer.
The sequence numbers refer to the drawing of the quick set-
up. Before connecting, please remember to switch off the
computer and disconnect the projector power cord.
SETTING UP
POWER OFF (1)
Switch off all equipment before
connecting.
Switch off all equipment before
connecting.
COMPUTER (2)
Connect to the computer graphics
port. Use an optional MAC adapter
if needed.
Connect to the computer graphics
port. Use an optional MAC adapter
if needed.
SOUND (3)
Connect sound from the computer
using an optional 3.5 mm stereo
jack cable.
Connect sound from the computer
using an optional 3.5 mm stereo
jack cable.
MOUSE (4)
Connect to the PS/2 mouse port.
Use optional cable and adapters for
MAC or serial mouse.
Connect to the PS/2 mouse port.
Use optional cable and adapters for
MAC or serial mouse.
VIDEO (5)*
Connect video. Use a SCART
adapter if needed.
Connect video. Use a SCART
adapter if needed.
MAINS (6)
Connect the power cord.
Connect the power cord.
POWER ON (7)
First switch on the projector, then
the source equipment for correct
recognition of the projector.
First switch on the projector, then
the source equipment for correct
recognition of the projector.
USE
ZOOM , FOCUS AND POSITION
Zoom the lens for desired image size,
focus the lens for an optically sharp
image and tilt the unit using the
integral adjustable feet to position the
image on screen.
Zoom the lens for desired image size,
focus the lens for an optically sharp
image and tilt the unit using the
integral adjustable feet to position the
image on screen.
RESET
Press RESET to automatically adjust
for position, width and stability.
RESET is automatically invoked when
a new source is connected.
Press RESET to automatically adjust
for position, width and stability.
RESET is automatically invoked when
a new source is connected.
CONTRAST AND BRIGHTNESS
Adjust CONTRAST and
BRIGHTNESS as preferred.
Adjust CONTRAST and
BRIGHTNESS as preferred.
* Video version only
ENGLISH