ASKProxima c130 User Manual

: (video sources only) changes the clarity of the edges of a video 

image. Select a sharpness setting.

: This option applies to computer and component video 

sources. It allows you to select a color space that has been specifically tuned 
for the input signal. When Auto is selected, the projector automatically 
determines the standard. To choose a different setting, turn off Auto, then 
choose RGB for computer sources, choose either SMPTE240, REC709 or 
REC601 for component video sources.

: changes the intensity of the colors. Select a listed rela-

tive warmth value. 

: allows you to individually adjust the gain (relative warmth 

of the color) and the offset (the amount of black in the color) of the red, 
green, and blue colors. 

: when it is set to Auto, the projector attempts to automati-

cally pick the video standard based on the input signal it receives. (The 
video standard options may vary depending on your region of the world.) If 
the projector is unable to detect the correct standard, the colors may not 
look right or the image may appear “torn.” If this happens, manually select 
a video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
dard menu.

: (video sources only) removes noise around the video image.

: (progressive signals only) If a hardware device, 

such as a DVD player, is not syncing properly with the projector, select this 
option to help it to sync when connected to the projector. 

The following four (4) options are for progressive and computer sources 
only. 

: adjusts the horizontal phase of a computer source.

: adjusts the vertical scan of a computer source.

: adjusts the position of a computer source.

: increases the brightness of whites that are near 100%.

Advanced menu

Sharpness

Color
Space

Color 
Temperature

Color Control

Video Standard