ASKProxima c200 User Guide
41
NOTE
: Use only approved accessories.
Red LED Behavior and Projector Errors
If the projector is not functioning properly and the red LED is blinking, con-
sult Table 2 to determine a possible cause. There are two second pauses
between the blinking cycles. Visit the Service and Support section of our
website at www.ask.no for more details on the red LED error codes.
sult Table 2 to determine a possible cause. There are two second pauses
between the blinking cycles. Visit the Service and Support section of our
website at www.ask.no for more details on the red LED error codes.
Projected image size
NOTE
: Visit our website at www.ask.no for an interactive image size calcu-
lator.
Extension Arm for Projector Mount 26” -
47”
47”
SP-LTMT-EXTP
PC Guardian Cable Lock System
SP-LOCK
50” Diagonal Screen (portable)
A650
60” Diagonal Screen (portable)
HW-DLXSCRN
84” Diagonal Wall/Ceiling Mounted Screen
HW-WALLSCR84
Portable Projector Stand
SP-STND
Replacement Lamp Module
SP-LAMP-006
MindPath RF PocketPoint Remote
HW-RF-POCKTPNT
IR Presentation Remote Control
590-0562-xx
Table 2:
Red LED Behavior
Explanation
One (1) blink
The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
attempts. Check the lamp and lamp door
installations for loose connections.
Two (2) blinks
The lamp counter hours have exceed
lamp life hours. Replace the lamp and
reset the lamp hours counter.
lamp life hours. Replace the lamp and
reset the lamp hours counter.
Optional Accessories
Part Number
Three (3) blinks
The projector has shut down the lamp.
Replace the lamp. Contact Technical Sup-
port for repair if replacing the lamp does
not solve the problem..
Replace the lamp. Contact Technical Sup-
port for repair if replacing the lamp does
not solve the problem..
Four (4) blinks
The fan has failed. Replace the lamp (the
lamp module contains a fan). Contact
Technical Support for repair if replacing
the fan does not solve the problem.
lamp module contains a fan). Contact
Technical Support for repair if replacing
the fan does not solve the problem.
Five (5) blinks
The projector is overheating. Check for a
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents
does not solve the problem.
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents
does not solve the problem.
Table 3:
Range of distance to the screen for a given screen size for C200
Diagonal
Screen Size
(inches/m)
Distance to screen
Image Width
(inches/m)
Maximum
distance
(feet/m)
(feet/m)
Minimum
Distance
(feet/m)
40/1.0
32/0.8
6.9/2.1
5.0/1.5
50/1.3
40/1.0
8.7/2.6
6.2/1.9
60/1.5
48/1.2
10.4/3.2
7.5/2.3
100/2.5
79/2.0
17.4/5.3
12.4/3.8
150/3.8
119/3.0
26.0/7.9
18.7/5.7
200/5.1
158/4.0
34.7/10.6
24.9/7.6
Table 2: