ASKProxima c440 User Manual

Plug the audio/video (A/V) cable’s yellow connector into the video-out 
connector on the video device. Plug the other yellow connector into the yel-
low Video 3 connector on the projector. Plug a white connector into the left 
audio out connector on the video device and plug a red connector into the 
right audio out connector on the video device. Plug the remaining white 
connector into the left audio in connector on the projector, and plug the red 
connector into the right audio in connector on the projector.

Connect the black power cable to the connector on the back of the projector 
and to your electrical outlet. NOTE: Always use the power cable that 
shipped with the projector.

If the video device uses a round, four-prong S-video connector, plug an 
S-video cable (sold separately) into the S-video connector on the video 
device and into the Video 2 connector on the projector. Use the A/V cable’s 
audio connectors as described directly above (the yellow connectors on the 
A/V cable are not used).

If the video device uses component cable connectors (sold separately), plug 
the cable’s green connectors into the green component-out connector on the 
video device and into the Video 1 green component connector (labeled “Y”) 
on the projector. Plug the component cable’s blue connectors into the blue 
component-out connector on the video device and into the blue component 
connector (labeled “Pb”) on the projector. Plug the component cable’s red 
connectors into the red component-out connector on the video device and 
into the red component connector (labeled “Pr”) on the projector. Use the 
A/V cable’s audio connectors as described above (the yellow connectors on 
the A/V cable are not used). NOTE: The component connectors can be used 
for HDTV sources (480i, 480p, 720p and 1080i formats).

connect A/V cable

connect power cable

connect S-video and video cables

connect component cables
and video cables