ASKProxima impact 21 User Guide
USER GUIDE
LCD PANEL
7
5 SETTING UP THE LCD PANEL
Switch off all equipment before connecting the components. Be aware of
static electricity that may build up, especially in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching
a metallic surface before you start.
static electricity that may build up, especially in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching
a metallic surface before you start.
Place the LCD panel on top of a transmissive overhead projector (OHP).
Select a high intensity type projector, for instance 400W halogen or metal-
halide. Best results are obtained in a dimmed room with no direct sunlight
shining in.
Select a high intensity type projector, for instance 400W halogen or metal-
halide. Best results are obtained in a dimmed room with no direct sunlight
shining in.
Connect the cables and power supply as described in the rear foldout page
(see Connection Layout)). Cable adapters are not used with VGA, only
with MACII and NEC9801.
(see Connection Layout)). Cable adapters are not used with VGA, only
with MACII and NEC9801.
Connect cable (1) between the LCD panel and the computer. Use the
Y-split on the computer end to connect the monitor.
Y-split on the computer end to connect the monitor.
If you have a Macintosh, EGA, CGA or NEC computer, insert applicable
adapters (2) and (3) as described in the table below.
adapters (2) and (3) as described in the table below.
Connect the power supply to the LCD panel (4).
COMPUTER
CABLE
ADAPTER
VGA
Analog
None
EGA/CGA
Digital (option)
None
MACII c../v../LC/
Quadra/Powerbook/
Duo
Quadra/Powerbook/
Duo
Analog
MACII (640x480)
NEC 9801
Analog
NEC 9801(option)