ASKProxima impact 24 User Guide
USER GUIDE
LCD PANEL
7
5 SETTING UP THE LCD PANEL
Switch off all equipment before connecting the components. Be aware of
static electricity that may build up, especially in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching
a metallic surface before you start.
static electricity that may build up, especially in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching
a metallic surface before you start.
Place the LCD panel on top of a transmissive overhead projector (OHP).
Select a high intensity type projector, for instance 400 W halogen or metal-
halide. Best results are obtained in a dimmed room with no direct sunlight
shining in.
Select a high intensity type projector, for instance 400 W halogen or metal-
halide. Best results are obtained in a dimmed room with no direct sunlight
shining in.
The following are guidelines for first time set-up:
Connect the cables and power supply as described below (see rear
foldout).
foldout).
Attach power to the LCD panel, turn the overhead projector and computer
on. If you are going to use a mouse, make sure to power the LCD panel
first. For more information on set-up see the following sections on
Computer/Mouse/Audio and Video.
on. If you are going to use a mouse, make sure to power the LCD panel
first. For more information on set-up see the following sections on
Computer/Mouse/Audio and Video.