ASKProxima impression 970 User Guide

USER GUIDE

XGA LCD MULTIMEDIA PROJECTOR

15

The projector is compatible with a wide variety of computer and video
sources, utilizing many different connectors. To be able to connect to these
various sources, a set of cables and cable adapters are provided.

The projector is supplied with one VGA type and one BNC type cable.
Optionally, adapter kits for Macintosh and 13W3 type computers are
available.

The VGA cable can be connected directly, or using a cable adapter,
depending on the type of connector used on your computer. See the table
below. One adapter is fitted at the computer end, the other adapter is fitted
at the monitor end.

The BNC cable may be used with computers with various connectors on
the computer side, but with a BNC type connector on the monitor. Use the
monitor cable, supplied with your computer, to connect to the BNC cable at
the computer end. The monitor branch connects directly to the BNC
connectors on the monitor.

PC or compatible fitted with a
VGA, SVGA, XGA or SXGA
graphics adapter

No adapter required. Connect
directly using VGA cable.

Macintosh

Set of two MAC adapters with VGA
cable

Workstation with 13W3 type
connector on graphics adapter

Set of two 13W3 adapters with
VGA cable

Workstation with BNC
connectors (on monitor) and
various connector types on
graphics adapter

No adapter required. Use original
monitor cable (supplied with your
computer) to connect to computer
end, then connect other branch to
monitor.

A combined composite video and stereo sound cable (the AV cable) is
supplied standard with your projector. This cable connects directly to
phono connectors on the video source. A SCART adapter is also supplied
that fits the AV cable.