ASKProxima impression 960 User Guide
USER GUIDE
LCD PROJECTOR
28
11 MAINTENANCE
From time to time, the housing and lens may be cleaned with a dampened,
non-abrasive cloth, using a mild detergent (dish washing soap, etc.) to
remove spots.
non-abrasive cloth, using a mild detergent (dish washing soap, etc.) to
remove spots.
Always be careful with the lens surface and use the lens cap for added
protection when the projector is not in use.
protection when the projector is not in use.
11.1
FUSE REPLACEMENT
The electrical fuse is located at the mains input, as an integral part of the
connector and switch assembly. See the figure below.
connector and switch assembly. See the figure below.
A defective fuse may indicate a permanent electrical failure. If a
new fuse breaks immediately, please return the unit to you
dealer for control.
new fuse breaks immediately, please return the unit to you
dealer for control.
Release the fuse holder and replace the broken fuse with a new one. Make
sure to use a fuse of correct rating, see Technical Data section. There is
room for a spare fuse in the holder.
sure to use a fuse of correct rating, see Technical Data section. There is
room for a spare fuse in the holder.