ASKProxima impression a4 User Guide

USER GUIDE

SVGA LCD PROJECTOR

14

This section will aid in adjusting  a stable, flicker-free image for best viewing
results.

Use the remote control or the projector keypad to adjust settings, either
directly or through the menu system.

The following list aids in a trouble free set-up of the projector. Try using a
patterned background (tiles, checkerboard pattern etc) when adjusting the
image.

1.  ZOOM, FOCUS AND POSITION IMAGE. The projection lens has a

manually adjustable zoom and focus. Place the projector at a suitable
distance to the projection screen, alternatively zoom the image,  to
obtain the desired screen size. (See the Technical Data section for max
and min projection distances.) Focus the image and observe that the
picture elements (pixels) become sharp on screen. The projector has
two adjustable feet in the front, so that the image can be shifted to a
desired height on the wall. Tilt the projector body in the desired position
and press the foot-release buttons. If necessary, fine adjust the height
by screwing the feet either direction.

2.  RESET in most cases automatically adjusts the image position, width

(FREQUENCY) and stability (TUNE). If RESET fails to adjust the image
correctly, see FREQUENCY, POSITION and TUNE below. RESET is
automatically activated when a new source is connected.

3.  SCALE the image as desired if you are viewing a lower (VGA) or higher

(XGA) resolution image. Scaling will fill the viewable area by enlarging a
lower resolution or compressing a higher resolution image. If you do not