ASKProxima m9 User Manual

Vertical 
Position

RCV

Signal 
Specific

Use this sub-menu to adjust the vertical position of the 
input source image within the projection area. 

Horizontal 
Position 

RCV

Signal 
Specific

Use this sub-menu to adjust the horizontal position of the 
input source image within the projection area. 

Frequency

R

Signal 
Specific

When vertical bands appear in the projected image while 
RGB is selected as the input source, it means that the 
frequency setting is not correct. When this happens, use 
this setting to adjust the frequency manually.

If, for some reason, your manual frequency settings 
cause the image input from the computer to 
disappear from the projection, you can press the 
[AUTO] key to perform an auto adjust operation, 
which should cause the image to appear.

Phase

R

Signal 
Specific

When there is flickering in the projected image while RGB 
is selected as the input source, it means that the phase 
setting is not correct. When this happens, use this setting 
to adjust the phase manually. 

Video Mode

RC

V

Source 
Specific

This setting is valid when VIDEO is selected as the input 
source. Use it to select a mode that is optimized for 
movies or still images. 
Normal*:

Optimized for movies. 

Still Image:

Optimized for still images. In particular, this setting 
should be used when projecting still images from a 
digital camera connected to the projector’s VIDEO 
terminal. 

Restore Menu 
Defaults

RCVU

Source 
Specific

Use this sub-menu to return all of the sub-menu items on 
the Image Adjustment main menu to their initial default 
settings. 
z

Restoring menu defaults when there is no input signal 
will restore defaults for the currently selected input 
source.

z

“Image Adjustment” main menu “Vertical Position”, 
“Horizontal Position”, “Frequency”, and “Phase” defaults 
can be restored for the current signal type (XGA/60Hz, 
SXGA/60Hz,etc.) only.