Sony dav-hdx678wf Manual

Page of 128
Contr
o
l f
o
r HDMI/
Extern
al A
u
dio 
D
e
vic
e
87
US
It is easy to set the same ID for the unit and an 
S-AIR sub unit, such as a surround amplifier or 
S-AIR receiver, to establish sound transmission. 
However, neighbors may also receive your 
system’s sound if IDs are the same, or you may 
receive the sound from neighbors. To prevent 
this, you can identify the unit with a specific 
S-AIR sub unit by performing the pairing 
operation.
Before pairing
Sound transmission is established by the ID 
(example).
After pairing
Sound transmission is established between the 
paired unit and S-AIR sub unit(s) only.
To perform pairing
1
Place the S-AIR sub unit that you want 
to pair near the unit.
Note
• Remove headphones from the surround 
amplifier (if connected).
2
Match the IDs of the unit and the S-AIR 
sub unit.
• To set the ID of the unit, see “To set the ID 
• To set the ID of the surround amplifier, 
• To set the ID of the S-AIR receiver, refer 
to the operating instructions of the S-AIR 
receiver.
3
Press FUNCTION +/– repeatedly until 
“DVD” appears in the front panel 
display.
4
Press 
 DISPLAY while the system is 
in stop mode.
The Control Menu display appears on the 
TV screen.
5
Press 
X/x to select 
 [SETUP], 
then press 
.
The options for [SETUP] appear.
6
Press 
X/x to select [CUSTOM], then 
press .
The Setup Display appears.
Identifying the unit with a 
specific S-AIR sub unit 
(Pairing operation)
For the surround amplifier
For the S-AIR receiver
This unit
ID A
S-AIR sub unit
ID A
ID A
S-AIR sub unit
Your room
Neighbor
This unit
ID A
S-AIR sub unit
ID A
ID A
S-AIR sub unit
Your room
Neighbor
Pairing
No transmission