Sony ht-ct500 Manual
101
US
Ad
dit
iona
dit
iona
l Inf
o
rma
tion
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV, VIDEO 1
TV, VIDEO 1
Sensitivity: 550 mV
Impedance: 33 kohms
Impedance: 33 kohms
Inputs (Digital)
TV, VIDEO 2
TV, VIDEO 2
Optical
VIDEO 3
Coaxial, optical
HDMI section
Connector
HDMI™ connector
Video inputs/outputs
BD, DVD, SAT/CATV:
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/
60 Hz
1920 × 1080p@59.94/
60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/
60 Hz
1920 × 1080p@59.94/
60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
Audio inputs
BD, DVD, SAT/CATV:
Linear PCM 7.1ch/
Dolby Digital/DTS
Linear PCM 7.1ch/
Dolby Digital/DTS
Tuner section
System
PLL quartz-locked digital
synthesizer
synthesizer
FM tuner section
Tuning range
Tuning range
87.5 MHz - 108.0 MHz
(100 kHz step)
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Tuning range
530 kHz - 1,710 kHz (with
the interval set at 10 kHz)
531 kHz - 1,710 kHz (with
the interval set at 9 kHz)
the interval set at 10 kHz)
531 kHz - 1,710 kHz (with
the interval set at 9 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Inputs
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p
75 ohms
Speaker (SS-CT500)
Speaker system
Full range, Bass reflex
(front speaker part), Full
range, Acoustic suspension
(center speaker part)
(front speaker part), Full
range, Acoustic suspension
(center speaker part)
Speaker unit
50 mm (2 in) cone type
Rated impedance
4 ohms
Dimensions (approx.)
957 mm × 90 mm × 51 mm
(37
(37
3
/
4
in × 3
5
/
8
in × 2
1
/
8
in) (w/h/d)
Mass (approx.)
1.9 kg (4 lb 4 oz)
Speaker cords
3 m (118
1
/
8
in)
Subwoofer (SA-WCT500)
Speaker system
Subwoofer, Bass reflex
Speaker unit
130 mm (5
1
/
8
in) cone type
Rated impedance
4 ohms
Dimensions (approx.)
212 mm × 374 mm × 364
mm (8
mm (8
3
/
8
in × 14
3
/
4
in ×
14
3
/
8
in) (w/h/d)
Mass (approx.)
9.1 kg (20 lb 1oz)
WS-CT500EB
Extension bracket
Dimensions (approx.)
286 mm × 179 mm × 60
mm (11
mm (11
3
/
8
in ×7
1
/
8
in ×
2
3
/
8
in) (w/h/d)
Mass (approx.)
1.3 kg (2 lb 14 oz)
Rear cover
Dimensions (approx.)
294 mm × 185 mm × 67
mm (11
mm (11
5
/
8
in × 7
3
/
8
in ×
2
3
/
4
in) (w/h/d)
Mass (approx.)
0.56 kg (1lb 4oz)
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 110 W
Standby mode: 0.3 W (when “CTRL: HDMI”
and “S-AIR STBY” are set to “OFF.”)
Standby mode: 0.3 W (when “CTRL: HDMI”
and “S-AIR STBY” are set to “OFF.”)
Power output
(DIGITAL MEDIA PORT) DC OUT: 5 V, 700 mA
(DIGITAL MEDIA PORT) DC OUT: 5 V, 700 mA
Design and specifications are subject to change without
notice.
notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85 % power efficiency of amplifier block is
achieved with the full digital amplifier, S-master.