Sony HT-DDW870 User Guide
masterpage:Left
lename[E:\SEM_Janet\Revision_DDW870\J9040000_2549734121DDW870UCA\2549734121\
GB03CON_HT-DDW870-UCA.fm]
model name1[HT-DDW870]
[2-549-734-12(1)]
16
GB
Installing the speakers on the
wall
wall
You can install your front, surround and
surround back speakers on the wall.
surround back speakers on the wall.
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
suitable for the hole on the back of
each speaker. See the illustrations
below.
2
Fasten the screws to the wall. The
screws should protrude 5 to 7 mm (7/32
to 9/32 inch).
screws should protrude 5 to 7 mm (7/32
to 9/32 inch).
3
Hang the speakers on the screws.
Notes
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
strength or improper screw installation, natural
calamity, etc.
more than 4 mm
(5/32 inch)
(5/32 inch)
more than 25 mm (1 inch)
Hole on the back of the speaker
4.6 mm
(3/16 inch)
(3/16 inch)
10 mm
(13/32 inch)
(13/32 inch)
5 to 7 mm
(7/32 to 9/32 inch)
4.6 mm
(3/16 inch)
(3/16 inch)
10 mm
(13/32 inch)
(13/32 inch)
Hole on the back of the speaker
GB01COV_HT-DDW870-UCA.book Page 16 Monday, December 20, 2004 2:00 PM