Sony ht-ss380 User Guide

• Use a 75-ohm coaxial cable (not supplied) 

to connect the receiver to an outdoor FM 
antenna (aerial) as shown below.

• Check that the antennas are connected 

securely. Adjust the antennas and connect 
an external antenna (aerial), if necessary.

• The signal strength of the stations is too 

weak with automatic tuning. Change to 
monaural reception (page 30).

• No stations have been preset or the preset 

stations have been cleared (when tuning 
by scanning preset stations is used). Preset 
the stations (page 31).

• Point the remote control at the remote 

control sensor on the receiver.

• Remove any obstacles in the path between 

the remote control and the receiver.

• Replace all the batteries in the remote 

control with new ones, if they are weak.

• Make sure you select the correct input on 

the remote control.

• Check the HDMI connection (page 19).
• Make sure “CTRL HDMI” is set to 

“CTRL ON” in HDMI menu.

• Make sure the connected equipment is 

compatible with the Control for HDMI 
function.

• Check the Control for HDMI settings on 

the connected equipment. Refer to the 
operating instructions of the connected 
equipment.

• The types and the number of equipment 

which can be controlled by the 
“BRAVIA” Sync are restricted in the 
HDMI CEC standard as follows.
– Recording equipment (Blu-ray Disc 

recorder, DVD recorder, etc.): up to 3 
equipment 

– Playback equipment (Blu-ray Disc 

player, DVD player, etc.): up to 3 
equipment 

– Tuner-related equipment: up to 4 

equipment 

– AV receiver (audio system): up to 1 

equipment 

• Depending on the connected equipment 

and TV, you may need to set up the 
equipment and TV. Refer to the operating 
instructions supplied with each equipment 
and TV. 

• Change the input of the receiver to the 

HDMI input connected to the equipment.

Receiver

Outdoor FM antenna (aerial)