Eagle 642c df igps User Manual

105

4. Press 

↓ to 

|

. Enter the longitude by pressing 

↑  ↓ to

change the first character, then press 

→ to the next character and repeat

until the longitude is correct. Press 

, then 

|

 to return to the

previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as waypoint 001. The waypoint
symbol and number appear on the map and in the waypoint list.

Navigate To a Waypoint

You can select any waypoint on the Map Page with the cursor, then use
the Navigate to Cursor command (we will describe how later in this
section.) You, however, can avoid scrolling the map to pick your way-
point if you use the Find Waypoint commands.

1. Press 

|

↑ to 

|

. To look up the nearest waypoint,

press 

↓

 

to 

|

. To look by name — and scroll through the en-

tire waypoint list — press 

↓|

. For this example, let's look by name.

2. If your waypoint list is a long one, you can spell out the waypoint name
in the 

 box. Press 

↑ ↓ to change the first character, then press

→ to move the cursor to the next character and repeat until the name is
correct, then press 

 to jump to the list below.

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ ↓ to select the waypoint name, press 

 and the

waypoint information screen appears with the 

 command selected.

4. To begin navigating to the waypoint, press 

.

Navigating to waypoint 002 and leaving a trail.