Eagle 642c df igps Operating Guide

115

1. Insert the MMC into your unit. Press 

|

|

↓ to 

|

|

↓ to 

|

.

2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must insert a card
into the unit to activate the Load or Save commands.

To transfer data from the unit to the MMC: press 

 (for 

.)

To transfer data from the MMC to the unit: press 

→ to 

|

.

3.  Saving to MMC: To accept the default name "Data" for the GPS
Data File, press 

↓ to 

|

. If you want to rename the file (as

shown in the following figures), press 

 to activate the selection box.

Press 

↑ ↓ to change the first character, then press → to the next char-

acter and repeat until the name is correct. Then press 

|

↓ to 

|

.

The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press 

.

   

   

These figures (from left to right) show the menu sequence for naming

and saving a GPS Data File from the unit's memory to an MMC.

4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press 

 to activate the selec-

tion box, use 

↓ ↑ to highlight the file, then press 

 to accept the se-

lection. Next, press 

↓ to 

|

. The unit will display a comple-

tion message when the data transfer is finished. To return to the main
page display, press 

 repeatedly.