Zonet zsr0104de Quick Setup Guide
37
2.3.1 Interface
The LAN Port screen below allows you to specify a private IP address for your router’s LAN ports
as well as a subnet mask for your LAN segment.
as well as a subnet mask for your LAN segment.
Parameters
Default Description
LAN IP
IP address
192.168.2.1
This is the router’s LAN port IP address (Your
LAN clients default gateway IP address)
LAN clients default gateway IP address)
IP Subnet Mask
255.255.255.0
Show a Subnet Mask for your LAN segment
DHCP Server
Enabled
You can enable or disable the DHCP server. By
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you’ll
have to manually set your LAN client’s IP
addresses; make sure the LAN Client is in the
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you’ll
have to manually set your LAN client’s IP
addresses; make sure the LAN Client is in the