Zonet zsr0104up User Manual

 

2. Due to the nature of the NAT implemented, only one user at a time can access the same 
VPN server on the Internet through this device. This means that two private network users 
cannot access the same VPN server locate on the public Internet simultaneously. 

3. For details on setting up a VPN client, please refer to your system’s documentation. 

This device allows users to define the internal routing table to best integrate this router into the 
current IP (sub) network. 
 
Note: Defining a new routing requires more advanced TCP/IP knowledge. Any wrong routing 

information may make the whole IP network unreachable, until it is corrected again. If 
you don’t have this information, please ask your network administrator for help. 

 
To define a new routing table, please follow the directions listed below: 
 

1. Click 

Advanced Settings in the top column. Then click Service Setup. 

 

2. Click 

Static Routing. 

 

 
 

Type the destination’s IP address, the net mask, the Gateway IP, and Metric. 
 

3. Select 

“Yes” in the Private option, if you do not want the device to broadcast the 

routing information (RIP). 

 

Select “No”, if you do want the device to broadcast the routing information to other 
routers on the network. 

 

4. Click 

the 

Add button. 

 

5.  A new static routing table has been defined. 

 
 

The Broadband Firewall Router offers support for hosting servers on your private network that 
can be accessed from the public Internet. While the addresses on the Broadband Firewall 
Router are not directly accessible by a computer on the Internet, the Broadband Firewall 
Router allows for selective access by mapping incoming access requests for a particular 

 

24