Zhone 6381-a4-200 User Guide
Chapter 4
Tools
This section provides access to the following pages—
• System
Commands
• Remote
Log—Modem
• User
Management
• Analyzer
• Ping
• Ping
Test
• Modem
Test
System Commands
To make the changes permanent, click on Tools (at the top of the page) and select System
Commands. The following commands are used to configure the modem:
Commands. The following commands are used to configure the modem:
• Save all: Press this button in order to permanently save the current configuration of the
modem. If you do re-start the system without saving your configuration, the modem will revert
back to the previously saved configuration.
back to the previously saved configuration.
• Restart: Use this button to re-start the system. If you have not saved your configurations, the
modem will revert back to the previously saved configuration upon re-starting. NOTE:
Connectivity to the unit will be lost. You can reconnect after the unit reboots.
Connectivity to the unit will be lost. You can reconnect after the unit reboots.
• Restore Defaults: Use this button to restore factory default configuration. NOTE:
Connectivity to the unit will be lost. You can reconnect after the unit reboots.