Eagle 320 Operating Guide

119

NOTE:

To load a Navionics



 chart, see Sec. 8 for the entry 

Navionics Charts.

GPS Data files:
GPS Data Files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.

GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the unit's internal memory before the unit can read them.
Here's how:

1. Insert the MMC into your unit. Press 

|

|

↓ to 

|

|

↓ to 

|

 and the screen below appears.

The Transfer My Data submenu asks if you want to save data to the

MMC or load data from the MMC into the unit's memory.

2. The Transfer My Data menu includes a message which tells you if an
MMC  is  present  or  not.  If  no  MMC  is present, you must first insert a
card into the unit in order to activate the Load or Save commands.

To transfer data 

from the unit to the MMC: press 

 (for 

.)

To transfer data 

from the MMC to the unit: press → to 

|

.

3. 

Saving to MMC: To accept the default name "Data" for the GPS

Data File, press 

↓ to 

|

. If you wish to rename the file (as

shown in the following figures), press 

 to activate the selection box.

Press 

↑ or ↓ to change the first character, then press → to the next

character and repeat until the name is correct. Then, press 

|

↓ to

|

.

The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press 

.