Eagle sport Operating Guide
51
NMEA 0183 Version
There are two versions of the NMEA data, 1.5 and
2.0. If your other equipment requires 2.0, press the
right arrow key to select it.
There are two versions of the NMEA data, 1.5 and
2.0. If your other equipment requires 2.0, press the
right arrow key to select it.
GLL Sentences - RMC/RMB Sentences - APB
Sentences
Some equipment requires different sentence. The
AccuMap Sport’s™ default setting for these sen-
tences is on. In other words, it automatically sends these sentences when
NMEA is turned on. To turn any of these off, move the black box to the
desired menu and press the left arrow key. Press the EXIT key when
everything on this screen is the way you want it.
Sentences
Some equipment requires different sentence. The
AccuMap Sport’s™ default setting for these sen-
tences is on. In other words, it automatically sends these sentences when
NMEA is turned on. To turn any of these off, move the black box to the
desired menu and press the left arrow key. Press the EXIT key when
everything on this screen is the way you want it.
DGPS
The AccuMap Sport will recognize Starlink
The AccuMap Sport will recognize Starlink
®
and
Magnavox
®
DGPS receivers. If you have either one
of these receivers, simply move the black box on
the NMEA / DGPS menu to the “Starlink DGPS” or
“Magnavox DGPS” menus and press the right ar-
row key to turn it on. (Note: If you have a Magnavox
DGPS receiver connected, the AccuMap Sport
can’t send NMEA data.) With the exception of se-
rial communications, typically no other setup needs to be made with these
receivers.
the NMEA / DGPS menu to the “Starlink DGPS” or
“Magnavox DGPS” menus and press the right ar-
row key to turn it on. (Note: If you have a Magnavox
DGPS receiver connected, the AccuMap Sport
can’t send NMEA data.) With the exception of se-
rial communications, typically no other setup needs to be made with these
receivers.
If you have any other Magnavox or Starlink com-
patible DGPS receiver connected to the AccuMap
Sport, you may need to change the settings. To do
this, move the black box to the “Configure DGPS
Beacon Receiver” label and press the right arrow
key. A screen similar to the one at right appears.
patible DGPS receiver connected to the AccuMap
Sport, you may need to change the settings. To do
this, move the black box to the “Configure DGPS
Beacon Receiver” label and press the right arrow
key. A screen similar to the one at right appears.
These menus select the beacon receiver’s fre-
quency and bit rate (in bits per second). If you are
using a Starlink receiver, turning the auto mode on causes the AccuMap
Sport to auto-detect the frequency and bit rate.
quency and bit rate (in bits per second). If you are
using a Starlink receiver, turning the auto mode on causes the AccuMap
Sport to auto-detect the frequency and bit rate.
To change one of these settings, simply move the black box to the menu
item you wish to change, then press the right or left arrow key until the
desired number appears. Press the EXIT key when you’re finished.
item you wish to change, then press the right or left arrow key until the
desired number appears. Press the EXIT key when you’re finished.