Eagle 1000c User Guide
164
Once you have each field set the way you want, press
EXIT
repeatedly
until you return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS. Here's how:
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS. Here's how:
1. Press
MENU
|
MENU
|
↓
to
GPS S
ETUP
|
ENT
|
↓
to
S
HOW
WAAS A
LARM
.
2. With the option highlighted, press
ENT
to uncheck it (turn off) or
check it (turn on). After the option is set, press
EXIT
|
EXIT
to return to
the page display.
3. You can return to this command and press
ENT
again to turn the
feature on.
Software Version Information
From time to time, Eagle updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.eaglesonar.com.
These upgrades make the unit perform better or introduce a new
feature or function. You can find out what software version is running
in your Unit by using the Software Information command.
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.eaglesonar.com.
These upgrades make the unit perform better or introduce a new
feature or function. You can find out what software version is running
in your Unit by using the Software Information command.
Software Information command (left); Software Information (right).
1. Press
MENU
|
MENU
|
↓
to S
YSTEM
S
ETUP
|
ENT
|
↓
to S
OFTWARE
I
NFO
|
ENT
.
2. Read the information displayed on the screen.
3. To return to the last page displayed, press
3. To return to the last page displayed, press
EXIT
|
EXIT
|
EXIT.