Eagle 2000c Operating Guide

114

As you travel, the arrival alarm will go off when you near a trail
waypoint and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press 

 to clear the alarm.

  

Navigate trail map views: the driver (left) is northbound heading

straight toward trail point 6. The northbound driver (right) has

reached point 6 and has turned west to follow the trail.

1. Press 

|

|

↓

 to 

|

.

2. Press 

↓ to enter the Saved Trail list, then use ↑ or ↓ to select the

desired Trail Name|

.

3. Press 

→

 to 

|

↓ to 

|

.

4. Press 

↓ to 

|

→ to 

|

|

← to 

|

. The unit

begins showing reverse navigation information along the trail.

NOTE:

If you are already located at or near the end of your trail, the
arrival alarm will go off as soon as you hit 

. Just press 

 to

clear the alarm and proceed.

5. Now, begin moving and let your GPS guide you.

6. When you reach your destination, be sure to cancel navigation. Press

|

|

↓

 to 

|

. The unit asks if you're sure,

press 

←

|

.

Transfer Custom Maps and GPS Data Files

Custom Maps

Custom maps work only from the MMC or SDC cards. When a card
containing a Custom Map File is loaded into the unit, it automatically
loads the map into memory when the unit is turned on.

Instructions for copying Custom Map Files to a MMC are contained in
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting a MMC into the Unit, see Sec. 2,
Installation/Accessories.