Eagle 2000c User Manual

106

1. Press 

|

→ to 

 column|

↓ to 

|

.

2. Press 

↓ to 

|

|

→ to 

|

.

3. Press 

→ to 

|

. Enter the latitude by pressing 

↑ or ↓ to

change the first character, then press 

→

 to the next character and

repeat until the latitude is correct. Press 

.

4. Press 

↓ to 

|

. Enter the longitude by pressing 

↑

 or 

↓

 to

change the first character, then press 

→

 to the next character and repeat

until the longitude is correct. Press 

, then 

|

 to return to the

previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map and in the waypoint list.

Navigate To a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command, which will be covered later
in this section. You can avoid scrolling the map to pick your waypoint if
you use the Find Waypoint commands:

1. Press 

|

→

 to 

|

. To look up the nearest waypoint, press

↓

 

to 

|

 or to look by name and scroll through the entire

waypoint list, just press 

. For this example, we’ll look by name.

2. If your waypoint list is a long one, you can spell out the waypoint
name in the 

 box. Press 

↑ or ↓ to change the first character,

then press 

→ to move the cursor to the next character and repeat until

the name is correct, then press 

 to jump to the list below.

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ or ↓ to select the waypoint name, press 

 and

the waypoint information screen appears with the 

 command

selected.

4. To begin navigating to the waypoint, press 

.