Eagle 2000c User Manual

161

The options are automatic, time or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.

From the Trails Menu, press 

→ to 

|

|

↓

 to 

. Press 

↑

 or 

↓

 to select criteria type|

. If you selected Time,

the Update

Rate data entry box appears on the menu. If you selected

Distance, the Update Distance data entry box appears on the menu.

You can update a trail by time, with a range from 1 to 9999 seconds.
The default is 3 seconds. You can update by distance, with a range from
0.01 to 9.99 mile/nm/km. The default is 0.10 miles.

With one of the Update Criteria selected, use the cursor arrows to
highlight either the 

 or 

 data entry

boxes and press 

. Press 

↑

 or 

↓

 to change the first character, then

press 

→

 to the next character and repeat until the entry is correct.

Press 

 to return to the Trail Options Menu.

 

Update Time Rate (left) and Update Distance(right).

Delete Trail
To delete a specific trail, from the Trails Menu, press 

↓ to 

|

. Select a trail and press 

. The Edit Trail menu appears as

seen in the following figure. Press 

→

 to 

|

|

←

 to 

|