Eagle 502c igps Operating Guide

115

The Transfer My Data submenu asks if you want to save data to the

MMC or load data from the MMC into the unit's memory.

2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the unit in order to activate the Load or Save commands.

To transfer data from the unit to the MMC: press 

 to 

.

To transfer data from the MMC to the unit: press 

→ to 

|

.

3.  Saving to MMC: To accept the default name "Data" for the GPS
Data File, press 

↓ to 

|

. If you want to rename the file (as

shown in the following figures), press 

 to activate the selection box.

Press 

↑ ↓ to change the first character, then press → to the next char-

acter and repeat until the name is correct. Then, press 

|

↓ to 

|

.

The unit will display first a progress then a completion message when
the data transfer is finished. To return to the main page display view,
press 

 repeatedly.

   

   

These figures (from left to right) show the menu sequence for naming

and saving a GPS Data File from the unit's memory to an MMC.