Amana 610-801c 10" laminate and trim blade Reference Guide
190
MDF/FIBER BOARD
SOFT/HARDWOOD
RIPPING
DEMOLITION
EMERGENCY
EMERGENCY
CABINET PLYWOOD
RIP/CROSSCUT
COMBINATION
RIP/CROSSCUT
PLASTIC LAMINATE
SINGLE & DOUBLE SIDED
SOFT/HARDWOOD
CROSSCUT
SA
W BLADES
Saw Blades
Saw Blade
Symbol
Keychart
Symbol
Keychart
18° HOOK
ALTERNATE TOP BEVEL
(ATB) GRIND
ALTERNATE TOP BEVEL
(ATB) GRIND
Amana Tool’s
®
PRESTIGE™ general-purpose blade cuts smoother and stays
sharper longer—in both solid wood and man-made materials. It features a massive
tool-steel plate (.102" thick!) with expansion slots and copper plugs that practically
eliminate vibration. The 40 teeth are ground with a steep 20° bevel angle,
alternating left and right, for crisp, clean cuts both across grain and with the grain.
The 18° hook angle yields an effortless feed. The precision-ground D-10 carbide
teeth are individually computer-verified to have minimal runout.
tool-steel plate (.102" thick!) with expansion slots and copper plugs that practically
eliminate vibration. The 40 teeth are ground with a steep 20° bevel angle,
alternating left and right, for crisp, clean cuts both across grain and with the grain.
The 18° hook angle yields an effortless feed. The precision-ground D-10 carbide
teeth are individually computer-verified to have minimal runout.
18
°
18
°
ØD
C
B
20
°
20
°
PRESTIGE™
10" TO 12"
PRESTIGE™ Rated
“EXCELLENT” for
“EXCELLENT” for
Ripping solid wood
Crosscutting solid wood
Ripping plywood
Crosscutting plywood
THIN KERF TRIM
8" TO 14"
10° HOOK
ATB OR TC GRIND
ATB OR TC GRIND
ALTERNATE TOP BEVEL (ATB) GRIND
Thin-kerf blades require less power because they have thinner plates and narrower
tips. This trim blade is ideal for jobsite table saws and the various miter saws for that
reason. Available in either alternate top bevel grind for cutting hardwood, softwood
and plywood, or triple-chip grind for chipboard and laminate-covered material. The
TC grind is also suitable for cutting thin Plexiglas
tips. This trim blade is ideal for jobsite table saws and the various miter saws for that
reason. Available in either alternate top bevel grind for cutting hardwood, softwood
and plywood, or triple-chip grind for chipboard and laminate-covered material. The
TC grind is also suitable for cutting thin Plexiglas
®
, masonite, and plastics. Use of
stabilizers is recommended when cutting stock over 3/4" thick.
TRIPLE CHIP (TC) GRIND
ATB
ATB
TCG
TCG
ØD
15
°
10
°
B
45
°
45
°
0.3
C
B
C
10
°
10
°
ATB
TCG
• Massive (.102" thick!) tool-steel plate with
copper plugs practically eliminates vibration.
• Precision-ground D-10 carbide teeth (20˚ ATB,
18˚ hook) are individually computer-verified for
runout of less than 1/10,000" on all axis.
runout of less than 1/10,000" on all axis.
ØD
‘B’ Kerf
‘C’ Plate
Inch mm
Teeth
Grind
Tool No.
Inch
Inch
Bore
10
250
40
ATB
PR1040
.134
.102
5/8
12
300
40
ATB
PR1240
.134
.102
1
ØD
‘B’ Kerf
‘C’ Plate
Inch mm
Teeth
Grind
Tool No.
Inch
Inch
Bore
8
200
64
ATB
TB86400
.090
.062
5/8
10
250
80
ATB
TB10800
.090
.062
5/8
10
250
100
ATB
TB10100
.090
.062
5/8
12
300
96
ATB
TB12960
.090
.062
1
14
350
108
ATB
TB14108
.090
.062
1
ØD
‘B’ Kerf
‘C’ Plate
Inch mm
Teeth
Grind
Tool No.
Inch
Inch
Bore
8
200
64
TCG
TB86401
.090
.062
5/8
10
250
80
TCG
TB10801
.090
.062
5/8
10
250
100
TCG
TB10101
.090
.062
5/8
12
300
96
TCG
TB12961
.090
.062
1
14
350
108
TCG
TB14109
.090
.062
1