Broan-NuTone 120 Specification Guide

Page of 2
SPECIFICATION SHEET
Broan-NuTone LLC,
 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
REGISTER
HEATERS
FOR IN-WALL RECESSED MOUNTING
Don't give up  beautiful  woodwork  for  baseboard
heating — Use these space-saving, downflow
alternatives.
FEATURES:
GRILLE:
Sturdy, one-piece construction
20 gauge, with downflow louvers
White, baked enamel finish
Color-coordinated mounting screws
HEATER ASSEMBLY:
Nickel-chrome resistance alloy heating element
Mica insulated, zig-zag element configuration
120 VAC units can be converted to operate on 240 VAC
All models can be converted to operate at half-wattage
Manual reset thermal overload protector
Permanently  lubricated motor
High-efficiency blower wheel
Removable from housing for cleaning or servicing
HOUSING:
24-gauge steel finished with black epoxy paint
Removable wiring cover - connect wiring away from tight
corners
Mounts directly to wall studs
Includes housing mask - to prevent construction damage to
roughed-in heater
Model 171H:
 Rough-in housing for use with finish assemblies
ACCESSORIES: (purchase separately)
Model 86W Line-Voltage Thermostat
Model 59V, 59W 60-Minute Timer
Model 61V, 61W 15-Minute Timer
60K
99042423E
TYPICAL SPECIFICATION
Heater shall be Broan Model 120, (124), (128).
Unit shall have steel housing finished with black, epoxy
paint. It will be recessed mounted in the wall.
Heater to deliver 1000 watts (Model 120), 1500 watts (Model
124), 2000 watts (Model 128) of fan-forced heat at safe
"black" temperatures. It must be convertible to operate at
half-wattage, 120 VAC units must be converted to operate at
half-wattage. 120 VAC units must be convertible to operate
on 240 VAC. Heater shall include a thermal overload protector
with manual reset.
Grille will be White in color, of one-piece construction and
will have downflow louvers. Color-coordinated grille screws
to be provided.
Unit shall be controlled with a wall-mounted thermostat
(Model 86W - Line Voltage Thermostat), or timer (Model 59V,
59W - 60-Minute Timer), (Model 61V, 61W - 15-Minute
timer).
Heater shall be U.L. listed.
NOTE: This heater is intended to be used to supply supplemental
heat from a wall location in new or existing construction.