Brother HL-2700CN Owner's Manual

CONTROL PANEL   3 - 3

You can change the panel indications from the current status (Menu, Error and Reprint settings) by 
pressing the Go button once. For ERROR indications, the control panel only changes when the error is 
cleared.

You can pause printing with the Go button. Pressing the Go button again restarts the print job and clears 
the pause. During a pause, the printer is off-line.

You can cancel the processing or printing of data with the Job Cancel button. The display shows JOB 
CANCELLING

 until the job is cancelled. After cancelling the job, the printer returns to the READY state.

When the printer is not receiving data or printing, the display shows NO DATA!!! and you cannot cancel 
the job.

If you press the + or - button when the printer is in the on-line (Ready) state, it goes off-line and the LCD 
displays the menu.

If you press the + or - button when the printer is in the on-line state, it goes off-line and the LCD displays 
the current mode.

You can go to other menus by pressing the + or - button. Pressing the + or - button allows you to move 
forward or backward through the menus and settings on the display. Press or keep pressing the button 
until you see the setting you want.

You can enter numbers in two ways. You can press the + or - button to move up or down one number at 
a time, or you can hold down the + or - button to move faster. When you see the number you want, press 
the Set button. 

If you press the Set button when the printer is in the on-line (Ready) state, it goes off-line and the LCD 
goes to the menu.

Pressing the Set button allows you to choose the displayed menu or option. After changing the setting, 
an asterisk (*) appears briefly on the right-hand side of the message.

If the printer is in PAUSE mode and you do not want to print the data that is left, you can cancel the 
job by pressing the Job Cancel button. Once the job has been canceled, the printer will return to 
the READY state.