Philips 37 User Guide

 

15

 

An after-image appears 

• 

If an image remains on the screen for an 
extended period of time, it may be imprinted in 
the screen and leave an afterimage. This 
usually disappears after a few hours.

 

An afterimage remains after the power 
has been turned off. 

• 

This is characteristic of liquid crystal and is not 
caused by a malfunction or deterioration of the 
liquid crystal. The afterimage will disappear after 
a period of time.

 

Green, red, blue, dark and white dots 
remain. 

• 

The remaining dots are normal characteristic of 
the liquid crystal used in today’s technology.

  

Poor TV signal reception 

• 

The proximity of mountains or high buildings 
may be responsible for ghost pictures, echoing 
or shadows. In this case, try manually adjusting 
your pictures: see 'fine tuning' or adjust the 
direction of the outside aerial. 

 

No TV picture 

• 

Have you connected the aerial socket properly? 
Have you chosen the right system? Poorly 
connected aerial sockets are often the cause of 
picture or sound problems (sometimes the 
connectors can become half disconnected if the 
TV set is moved or turned). Check all 
connections.

 

No sound 

• 

Ensure that the audio cables are firmly 
connected to both the audio input connectors on 
your TV and audio output connectors on your 
PC or Video player.

 

 

For further assistance, contact your local distributor.

 

 

Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 
15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.