Knoll hd102 User Manual

 

4

•  Place the projector in a horizontal position no greater 

than 15 degrees off axis. 

•  Locate the projector in a well-ventilated area without 

any obstructions to intake or exhaust vents.  

•  Do not place the projector on a tablecloth or other 

soft covering that may block the vents.  

•  Locate the projector at least 4' (1.2 m) away from any 

heating or cooling vents. 

•  Use only Knoll-approved ceiling mounts. 

•  Use only the power cord provided. A surge-protected 

power strip is recommended. 

•  Refer to this manual for proper startup and shutdown 

procedures. 

•  In the unlikely event of the lamp rupturing, discard 

any edible items placed in the surrounding area and 
thoroughly clean the area along all sides of the 
projector.  

• 

Wash hands after cleaning the area and handling the 
ruptured lamp. This product has a lamp, which 
contains a very small amount of mercury. Dispose of 
it as required by local, state or federal ordinances and 
regulations. For more information see 

 

 
 

 

 

 

 
 
 
 
 

 
Follow these instructions to help ensure image quality and lamp life over the life of the projector. 
Failure to follow these instructions may affect the warranty. For complete details of the warranty, 
see the Warranty section at the end of this User's Guide.