Knoll hd177 User Manual

 

9

If your video device has more than one output, select the highest quality one. DVI video has the best quality, 
followed by Component video, S-video, and then composite video.  

If the video 
device uses 
component 
cable 
connectors, 
plug the cable’s 
green con-
nectors into the 
green 
component-out 
connector on 
the video device 
and into the 
green 
component 
connector 

(labeled “Y”) on 
the projector. 
Plug the 
component 
cable’s blue 
connectors into 
the blue 
component-out 
connector on 
the video device 
and into the 
blue component 
connector 
(labeled “Pb”) 
on the projector. 
Plug the 
component 
cable’s red 
connectors into 
the red 
component-out 
connector on 
the video device 
and into the red 
component                                             
connector 
(labeled “Pr”) on 
the projector.  

 

If the video device uses a round, four-prong S-video connector, plug an  S-video cable into the S-video 
connector on the video device and into the S-video connector on the projector.  
 

If the video device uses a yellow composite video connector, plug a composite video cable’s yellow 
connector into the video-out connector on the video device. Plug the other yellow connector into the yellow 
Video connector on the projector.  

 
If the video device uses a DVI connector, plug an M1-D cable into the video-out connector on the video 
device. Plug the other connector into the M1-DA connector on the projector.