KitchenAid kebc167vss Specification Guide
PRODUCT MODEL SERIES
PRODUCT DIMENSIONS
CABINET OPENING DIMENSIONS
KEBC167M
KEBC167V
KEBC167V
Electrical: A four-wire or three-wire, single
phase, 240-volt, 60-Hz, AC-only electrical supply is
required on a separate, 30-ampere circuit, fused
on both sides of the line.Use minimum 8 gauge
copper wire only. A time-delay fuse or circuit
breaker is recommended. A U.L.-listed conduit
connector must be provided at the junction box.
phase, 240-volt, 60-Hz, AC-only electrical supply is
required on a separate, 30-ampere circuit, fused
on both sides of the line.Use minimum 8 gauge
copper wire only. A time-delay fuse or circuit
breaker is recommended. A U.L.-listed conduit
connector must be provided at the junction box.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. 8304426
11-26-08
36" (91.4 cm) Built-in Single Oven
®
Cabinet side
view
Electrical supply junction box should be located 3" (7.6 cm) maximum
below the support surface when oven is installed in a wall cabinet. Drill a
1" (2.5 cm) minimum diameter hole in the right rear or left rear corner of
the support surface to pass the appliance cable through to the junction
box. For undercounter installation, it is recommended that the junction
box be located in the adjacent right or left cabinet. If installing the junction
box on rear wall behind oven, junction box must be recessed and located
in the upper or lower right or left corner of cabinet.
below the support surface when oven is installed in a wall cabinet. Drill a
1" (2.5 cm) minimum diameter hole in the right rear or left rear corner of
the support surface to pass the appliance cable through to the junction
box. For undercounter installation, it is recommended that the junction
box be located in the adjacent right or left cabinet. If installing the junction
box on rear wall behind oven, junction box must be recessed and located
in the upper or lower right or left corner of cabinet.
36" (91.4 cm) min.
cabinet width
34-1/2"
(87.6 cm)
cutout width
5-1/4" (13.3 cm)
bottom of cutout
to floor
bottom of cutout
to floor
27-3/4"
(70.5 cm)
min.
cutout
height
(70.5 cm)
min.
cutout
height
1-1/2" (3.8 cm)
min. top of cutout
to underside of
countertop
min. top of cutout
to underside of
countertop
recessed
oven
cabinet
oven
front
front
36" (91.4 cm) min.
cabinet width
34-1/2"
(87.6 cm)
cutout
width
1" (2.5 cm)
top of cutout to
bottom of upper
cabinet door
top of cutout to
bottom of upper
cabinet door
1-1/2" (3.8 cm)
min. bottom of
cutout to top of
cabinet door
32"
(81.3 cm)
bottom of
cutout to
floor
27-3/4"
(70.5 cm)
min.
cutout
height
height
Single
undercounter oven
(without cooktop
installed above)
23" (58.4 cm)
recessed oven depth
23-1/4" (59.1 cm) min.
cutout depth
A. 34
³⁄₈" (87.3 cm) max. recessed width
B. 29" (73.7 cm) max. overall height
C. 35
C. 35
³⁄₄" (90.8 cm) overall width
D. 23" (58.4 cm) max. recessed depth
E. 27
¹⁄₂" (69.9 cm) recessed height
A
B
C
D
E