Aethra d2061 User Manual
ADSL TESTER D2061
USER’S MANUAL
Mode: Select the Call mode.
• Outgoing 64k/56K: the instrument generates a call to a remote instrument.
Once connected the instrument sends its sequence and at the same time
measures the received one. This makes it possible to test a single network
section and identify the “noisiest” path. The remote instrument must be
configured in INCOMING mode with the same sequence.
measures the received one. This makes it possible to test a single network
section and identify the “noisiest” path. The remote instrument must be
configured in INCOMING mode with the same sequence.
To make an auto call, select Outgoing 64k and enter your own
telephone number as CALLED NUMBER. In this case the test is
performed using two B channels (128k).
telephone number as CALLED NUMBER. In this case the test is
performed using two B channels (128k).
• Incoming 64k/56K: the instrument waits for a call from a remote instrument.
As soon as a compatible call is received, the instrument answers
automatically and starts sending and measuring according to the set
pseudorandom sequence. Use a remote instrument that is set in
OUTGOING mode with the same sequence.
automatically and starts sending and measuring according to the set
pseudorandom sequence. Use a remote instrument that is set in
OUTGOING mode with the same sequence.
60
CHAPTER 3 - PERFORMING A MANUAL TEST