Vertu ti User Guide

Use Vertu Portable Power to charge your VERTU Ti phone

1. To switch on your Vertu Portable Powerpack, press and hold the Power button until the charging

indicator lights are illuminated.

2. Using the cable management lever, release the integrated USB cable.

3. Connect the USB cable to the microUSB connector on your VERTU Ti phone.

4. When charging is complete, disconnect your phone from the pack and re-house the cable.

To ensure optimum signal performance of your VERTU Ti phone, do not place your Vertu Portable Power
pack against your phone during calls.

Use Vertu Portable Power to charge a compatible accessory

1. Switch on your Vertu Portable Power. Press and hold the Power button until the charging indicator

lights are illuminated.

2. Connect the cable supplied with your accessory to the auxiliary USB power output on your Vertu

Portable Power pack.

3. When charging is complete, disconnect the accessory from the Vertu Portable Power pack.

In the unlikely event that the connected accessories draw excessive power from your Vertu Portable Power
pack, charging is suspended and the indicator lights flash. Disconnect the accessories and press the
Power button to reset your Vertu Portable Power pack.

Note: The surface of this device does not contain nickel in the platings. The surface of this device contains
stainless steel.

Wired stereo headset

Your VERTU Ti phone is supplied with a wired stereo headset, which includes a microphone. Connect this
to the headset connector of your VERTU Ti phone.

All the volume and music controls, and call handling functions, are contained within your VERTU Ti phone.

Accessories