Pyle pldvd134f Owner's Manual

BASIC OPERATION

Loading a DVD/VCD/CD Disc

1. Turn the ignition on the accessory

position.

2. Press the POWER button (1).
3. Insert the disc with printed side facing

up into the disc slot (2).

4. The player starts playback

automatically.

Ejecting a Disc

Press (EJECT) button (3) to eject the
disc.

Stopping Play
- Brief press the (Stop) button to stop

the unit playback, when press the
(Play) button it can continuous normal
playback.

- Press (Stop) button twice, it will stop

the playback and go back to initial
Track/Chapter.

Rapid Forward/Rapid Reverse
Press

FF &

REW during play.

Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follow.
DVD/VCD/CD/MP3:

Skipping Track
Press

on the remote handset or

front panel during playback.
Press

to skip to next track, and

back one track.
Note: For some VCD 2.0 discs
(PBC-playback control),

and

buttons may be unavailable.

Slow Motion Play
Press slow button during playback.
Each time the button is pressed, the slow
mode changes according to the disc as follow.
DVD:

VCD:

Normal Playback

Note: For VCD, in any slow mode, press
ENTER button to return to normal
playback.

Pause (still picture)
Pressing

during playback will stop

play temporary. Return to normal
playback, press

once again.

Repeat
Press the REPEAT button to select repeat
mode as follow.
DVD:
Press the REPEAT button to select repeat
mode as follow.

VCD/CD:
Press the REPEAT button to select repeat
mode as follow.

1. Continuously repeat at the current chapter/

track, when selected REP-ONE mode.

2. Select REP-ALL mode to continuously

repeat all chapter/track on the current disc.

3. When the player finish playback the current

disc last chapter/track, it will stop display
the elapsed time. When selected REPEAT
OFF mode (REP-ONE & REP-ALL
disappear at the screen display).

4. REPEAT feature does not support

VCD2.0 (with PBC ON).

Aux input jack (4)
When the unit connect external A/V you
can press the AUX on the remote controller
to switch to the aux input mode.

Reset
Reset button is placed on the front panel
and must be activated with a ball point
pen or thin metal object. Reset button is
to be activated for the following reasons:
• Initial installation of the unit when all

wiring is completed.

• All the function buttons do not operate.
• Error symbol on the display.

Remote Sensor (IR)
Point the remote handset to the remote sensor.
Receive the signal from remote handset.

Turning the player on/off
Press the (POWER) button on front of
panel or press (POWER) button on
remote control to turn the player on or off.

Normal Playback

SF 2X

SF 4X

SF 8X

SR 8X

SR 4X

SR 2X

CHAPTER REPEAT ON

TITLE REPEAT ON

REPEAT OFF

REP-ONE

REP-ALL

Normal Playback

SF 1X

SF 2X

SF 3X