Videolarm fdp75c2n User Guide

Page of 25
IMPORTANT SAFEGUARDS
SAFETY PRECAUTIONS
UNPACKING
SERVICE
1  Read Instructions - All the safety and operating 
instructions should be read before the unit is 
operated.
2  Retain Instructions - The safety and operating 
instructions should be retained for future
reference.
3  Heed Warnings - All warnings on the unit and in the 
operating instructions should be adhered to.
4  Follow Instructions - All operating and user 
instructions should be followed.
5  Electrical Connections - Only a qualified 
electrician should make electrical connections.
6  Attachments - Do not use attachments not 
recommended by the product manufacturer as 
they may cause hazards.
7  Cable Runs - All cable runs must be within 
permissible distance
8  Mounting - This unit must be properly and securely 
mounted to a supporting structure capable of 
sustaining the weight of the unit. 
Accordingly:
a. The installation should be made by a qualified 
installer.
b. The installation should be in compliance with 
local codes.
c. Care should be exercised to select suitable 
hardware to install the unit, taking into
account both the composition of the mounting
surface and the weight of the unit. 
Be sure to periodically examine the unit and the
supporting structure to make sure that the integrity
of the installation is intact. Failure to comply with the 
foregoing could result in the unit separating from the 
support structure and falling, with resultant damages or 
injury to anyone or anything struck by the falling unit.
Unpack carefully. Electronic components can be 
damaged if improperly handled or dropped. If an item 
appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper.
Be sure to save:
1  The shipping carton and packaging material.
They are the safest material in which to make 
future shipments of the equipment.
2  These Installation and Operating Instructions.
If technical support or service is needed, contact us 
at the following number:
The lightning flash with an arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the presence 
of non-insulated “dangerous voltage” 
within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk 
of electric shock to persons.
Este símbolo se piensa para alertar al usuario a la 
presencia del “voltaje peligroso no-aisIado” dentro del 
recinto de los productos que puede ser un riesgo de 
choque eléctrico.
Ce symbole est prévu pour alerter I’utilisateur à la 
presence “de la tension dangereuse” non-isolée dans la 
clôture de produits qui peut être un risque de choc 
électrique.
Dieses Symbol soll den Benutzer zum Vorhandensein der 
nicht-lsolier “Gefährdungsspannung” innerhalb der 
Produkteinschließung alarmieren die eine Gefahr des 
elektrischen Schlages sein kann.
Este símbolo é pretendido alertar o usuário à presença 
“di tensão perigosa non-isolada” dentro do cerco dos 
produtos que pode ser um risco de choque elétrico.
Questo simbolo è inteso per avvertire I’utente alla 
presenza “di tensione pericolosa” non-isolata all’interno 
della recinzione dei prodotti che può essere un rischio di 
scossa elettrica.
The exclamation point within an equilateral 
triangle is intended to alert the user to 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.
Este símbolo del punto del exclamation se piensa para 
alertar al usuario a la presencia de instrucciones 
importantes en la literatura que acompaña la 
aplicación.
Ce symbole de point d’exclamation est prévu pour 
alerter l’utilisateur à la presence des instructions 
importantes dans la littérature accompagnant 
l’appareil.
Dieses Ausruf Punktsymbol soll den Benutzer zum 
Vorhandensein de wichtigen Anweisungen in der 
Literatur alarmieren, die das Gerät begleitet.
Este símbolo do ponto do exclamation é pretendido 
alertar o usuário à presença de instruções importantes 
na literatura que acompanha o dispositivo.
Questo simbolo del punto del exclamaton è inteso per 
avvertire l’utente alla presenza delle istruzioni importanti 
nella letteratura che accompagna l'apparecchio.
TECHNICAL SUPPORT
AVAILABLE 24 HOURS
1800 554 -1124
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
LIMITED WARRANTY
FOR VIDEOLARM INC. PRODUCTS
VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship, as follows:
PRODUCT CATEGORY
PARTS
 
 
LABOR
All Enclosures and Electronics
Three (3) Years
 
 
Three (3) Years
Pan/Tilts  
 
 
Three (3) Years **6 months if used in autoscan
Three (3) Years **6 months if used in autoscan
Poles/PoleEvators
 
 
Three (3) Years
 
 
Three (3) Years
Warrior/Q-View/I.R. Illuminators/SView            Five (5) Years
Five (5) Years
Controllers
 
 
Three (3) Years
 
 
Three (3) Years
Power Supplies
 
 
Three (3) Years
 
 
Three (3) Years
Accessory Brackets
 
 
Three (3) Years
 
 
 
Three (3) Years
During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Videolarm Inc.
Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package
an equal degree of protection with a
RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support
Team at 800.554.1124, extension 101. Videolarm will return the repaired Product freight prepaid to Purchaser. Videolarm is not obligated to provide
Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or
parts charges.
The limited warranty stated in these product instructions is subject to all of the following terms and conditions:
1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice
with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the
warranty period. If after investigation Videolarm determines that the reported problem was not covered by the warranty, Purchaser shall pay Videolarm
for the cost of investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall
extend the warranty period as to the entire Product. The
warranty on the repaired part only shall be in
for a period of ninety (90) days
following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater.
2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair
any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.
3. EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service
during the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts
of God (i.e., hurricanes, earthquakes),
failure of the end-user to follow the directions outlined in the product instructions, failure of the
end-user to follow the maintenance procedures recommended by the International Security Industry Organization, written in product instructions,
or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is
for regular
replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by
personnel; operation of the Product outside of the published environmental and electrical parameters, or if such Product’s original
(trademark, serial number) markings have been defaced, altered, or removed. Videolarm excludes from warranty coverage Products sold
AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying
documentation furnished with, or as part of the Product is furnished “AS IS” (i.e., without any warranty of any kind), except where expressly provided
otherwise in any documentation or license agreement furnished with the Product.
4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.
DISCLAIMER OF WARRANTY
EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH
REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE
STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM
PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS PURCHASER CHOOSES TO CONNECT TO PRODUCT.
LIMITATION OF LIABILITY
THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND
WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF