Sony DSC-P41 Manual

Page of 124
93
Tr
ou
bl
esho
o
ting
Troubleshooting
If you have trouble with your camera, try 
the following solutions. 
1
First, check the items on pages 93 to 101. 
If the LCD screen shows 
“C:
ss
:
ss
,” the self-diagnosis 
function is working. Please see 
page 104.
2
Should your camera still not work 
properly, press the RESET button 
located inside the jack cover, then turn 
on the camera again. (This will clear the 
date and time settings, etc.)
3
Should your camera still not work 
properly, consult your Sony dealer or 
local authorized Sony service facility.
Battery and power
RESET
Symptom
Cause
Solution
The battery remaining 
indicator is incorrect. Or 
the sufficient battery 
remaining indicator is 
displayed but the power 
soon runs out.
• You have used the camera in an extremely cold 
location.
• The batteries are discharged.
• The battery contacts or the terminals on the 
battery/“Memory Stick” cover are dirty.
• The nickel-metal hydride batteries are exhibiting 
the “memory effect” (page 10).
• When using nickel-metal hydride batteries, a 
mismatch has occurred in the remaining battery 
time information.
• The batteries are dead (page 113). 
p See page 113.
p Install charged batteries or replace with new ones (pages 11
12).
p Wipe any dirt off from them with a dry cloth.
p To restore the batteries to their original condition, use them until 
they are drained before recharging them.
p To restore the batteries to their original condition, use them until 
they are drained before recharging them.
p Replace the batteries with new ones. 
The battery runs down too 
quickly.
• You are using in an extremely cold location.
• The nickel-metal hydride batteries are not 
charged enough.
• The batteries are dead (page 113).
p See page 113.
p Fully charge the batteries (page 11).
p Replace the batteries with new ones.
Troubleshooting